VLite / Vision Lite - Config Software
Vision Lite
Vision Lite is a 4K Matrix Switching, Video Wall Control, and configuration software for use with 4 & 5 series endpoints. It automatically discovers units on your network without any configuration.
The Vision Lite Server Application is cross‐platform capable (or OS agnostic), meaning that the software works on Windows, Mac, and Linux. The Vision Lite User Interface is a browser-based application that works on PCs, Apple or Android tablets, and mobile devices. Browsers supported are Chrome, Firefox, Internet Explorer, and so on.
Install Instructions
- Java is required to use VLite. Download the appropriate runtime here - Java - Dropbox. Run this installer right away.
- Download the latest VLite software. You can find it under the downloads section of each endpoints, or right here: https://visionary-av.com/wp-content/uploads/2025/08/VLite-3.19.5_Software__Release-Notes.zip
- Create a folder with read/write access and place the .jar file within it. We recommend C:\VLite, although any folder can be used.
- Launch the application by either double clicking on the .jar file, or via the comand line with "java -jar fileNameHere.jar"
- The Vision Lite Server window opens.
6. Go to the Network Interface menu and select the appropriate network interface.
Select the network interface that the Vision Lite Server will be “listening” on. If your machine has more than one network interface, you will need to select the interface that is connected to the same network as the units.
Important: The Vision Lite Server window can be minimized in the background; however, it must always be running.
7. The default port assignment for VLite is 8080, other programs running on the computer may be using port 8080. If that is the case, the port for VLite will need to be changed for VLite to open. To change the port assignment, click on “Port” then enter the desired port number.
Important: The Vision Lite Server window needs to be closed and then reopened for the new port number to be assigned.
8. Copy the Vision Lite Server IP Address from the Vision Lite Server window to your clipboard.
9. To launch the Vision Lite User Interface, open a browser page and copy the Vision Lite Server IP Address IP Address to the URL.
Note: You can log in from any machine on the network.
10. Log in with username=admin password=admin.
Note: A second user type with limited access rights is available. Log in with username=user1 password=user1.
11. The Configuration page opens. You now have access to configure each unit.
• On the Configuration page, you can click on the IP Address (hyperlink) of any endpoint to open the embedded web interface for each unit. On the unit’s web interface, you can rename the units and/or set a user defined location.
Important: SPECIAL CHARACTERS ARE NOT ALLOWED FOR UNIT ID AND LOCATION. Example: -@#$% are not allowed.
Note: When making changes to the endpoints, the endpoints briefly disappear from the Vision Lite User Interface while they are rebooting and the application rediscovers them.
• - From the Configuration page, you can update the firmware for any units that may be out of date. The Vision Lite software displays a message if a newer firmware is available.
- On the Routing tab, you can drag‐n‐drop to route and switch sources to displays.
- On the Routing tab, you can drag‐n‐drop to route and switch sources to displays.
Note: Double-click the preview of a unit to open that unit’s web UI from the Routing tab.